Acopia Adaptive Resource Switch, Cli Maintenance Manual

Page: 191 / 324

Troubleshooting Network Connections
Tracing NSM Processes in the “fastpath” Log
CLI Maintenance Guide 7-17
Disabling Log Messages for an NSM Component
You can stop all log messages from a given NSM component; this applies to every
instance of the component, on every NSM processor that is enabled for logging. Use
the
no
form of the
logging fastpath component
command:
no logging fastpath component name level
where
name identifies the NSM-log component to disable (see “NSM-Log
Components” on page 7-12 ), and
level (1-10) is the component’s current log level.
This is equivalent to
logging fastpath component name 0
.
For example, the following command disables logging from the TEM_CIFS
component:
bstnA6k(cfg)# no logging fastpath component TEM_CIFS 6
bstnA6k(cfg)# ...
Showing All NSM-Log Components and Levels
Use the
show fastpath logging
command to see the logging levels for all NSM-log
components:
show fastpath logging
This displays two tables. The first lists all of the NSM processors with logging
enabled. The second lists all of the components that are being traced, along with any
filtering configuration.
For example:
bstnA6k(cfg)# show fastpath logging
Show Fastpath logging
---------------------
Slot Processor
-------------------------