Acopia Adaptive Resource Switch, Cli Maintenance Manual

Page: 251 / 324

Troubleshooting Managed Volumes
Correcting Share-Import Errors
CLI Maintenance Guide 8-45
Restarting the Import
After you correct the problem, you can restart the import for the share. To remove the
share from the managed volume, skip ahead to the next section.
Import Interrupted
An administrator stopped the import with the
cancel import
command. You may be able to restart the import with
no enable
(gbl-ns-vol-shr)
and then
enable
. If the import was stopped too
far in the process, you must first use
nsck ... destage
to shut
down the volume, remove and re-add the share, then
enable
the
volume again.
Internal Error ( number )
I
nternal problem; contact Acopia personnel.
Metadata Only
The share is designated to store namespace metadata only, so
there are no client-accessible files to import. This serves as an
explanation; it is not an import error.
Offline: Volume Disabled
No imports are possible unless the volume is enabled. Use the
enable (gbl-ns, gbl-ns-vol)
command to enable the volume.
Offline: Volume Failed
The metadata share for the volume failed to import. Use
metadata share
to designate a new dedicated share for metadata,
or use
metadata allowed
to allow metadata on an imported share.
Remove Interrupted
An administrator stopped the share removal with the
cancel
remove
command. To restart the removal process, use
remove-share migrate
,
remove-share nomigrate
,
no share
, or
no
filer
.
Storage job aborted.
The import process was interrupted by an
nsck ... rebuild force
.
Uninitialized (No filer assigned)
Use the
filer
command to assign a filer to the share, then retry the
import.
Table 8-1. Share Status Conditions (Continued)
Status Condition Description/Action