Acopia Adaptive Resource Switch, Cli Maintenance Manual

Page: 79 / 324

Upgrading Software
Upgrading a Redundant Pair
CLI Maintenance Guide 4-17
system initialization.
If the software on this system has NOT recently been
upgraded or downgraded, we advise you to restore the
running-config and/or global-config from a recent backup.
Otherwise, please use individual CLI commands to upgrade
or downgrade in smaller steps.
************************ NOTICE ***********************
SWITCH> ...
Restoring the Old Configuration
The final step in reverting to the old software is to restore the old configuration
parameters. To re configure the switch,
run
the old running-config as a script. (You do
not need to re-install the global-config; when the switch rejoined the pair, it
downloaded the global-config from its peer.)
For example, the following command sequence copies the running config from an
FTP server, runs it, then enters cfg-redundancy mode and rejoins the redundant pair:
SWITCH> enable
SWITCH# copy ftp://juser:jpasswd@ftp.wwmed.com/runConfA1k scripts running
% INFO: The copy command completed successfully.
SWITCH# show scripts
scripts
global Apr 12 17:45 3.3k
running Apr 12 17:45 2.1k
start_conf Apr 12 17:45 5.5k
SWITCH# run scripts running
SWITCH# config
SWITCH(cfg)# hostname prtlndA1kB