Acopia Adaptive Resource Switch, Cli Maintenance Manual

Page: 126 / 324

Metadata Utilities: nsck and sync
Clearing All nsck Jobs
5-46 CLI Maintenance Guide
For example:
bstnA6k(gbl)# end
bstnA6k# clear nsck
Clear all nsck records? [yes/no] yes
bstnA6k# show nsck
Op Id Op Type Namespace:Path Status
------ ------------ ---------------------------------------- ------------------
bstnA6k# ...
Clearing One nsck Job
Use the nsck-job ID with the
clear nsck
command to clear one nsck job:
clear nsck job-id
where job-id (1-2,147,483,647) identifies the nsck job to stop. This ID appears in
the name of the nsck report.
As above, the CLI prompts for confirmation before clearing the job. Enter yes to
proceed.
For example, the following command sequence stops nsck-job 1, which was still in
Phase 1 of processing:
bstnA6k(gbl)# show nsck
Op Id Op Type Namespace:Path Status
------ ------------ ---------------------------------------- ------------------
1 report wwmed:/acct Report in progress
bstnA6k(gbl)#
end
bstnA6k# clear nsck 1
Clear NSCK ID 1? [yes/no] yes
bstnA6k# ...