Acer V55LA User Manual Download | Manualshive

Page: 60 / 80

background image

2.3.1

Shadow RAM

The system reserves 384 KB of random access memory (RAM) for the
shadow RAM function. This parameter has eight range addresses.
When you set these addresses to

Enabled

, the system BIOS, video

BIOS, and I/O ROM functions run directly from the shadow RAM for
faster operation. When you set them to

Disabled

, the functions run

normally from ROM.

The address range E0000h - FFFFFh is for shadowing the system
BIOS. This item is always set to

Enabled

and is not user-

configurable. The address range C0000h - C7FFFh is for shadowing
the video BIOS. This item is fixed to

Enabled

and is not user-

configurable. The remaining address ranges are for I/O ROM
functions.

2.3.2

Internal Cache (CPU Cache)

This parameter enables or disables the internal cache memory. This
item is fixed to

Enabled

and is not user-configurable if you enabled

the Auto configuration Mode and Fast Boot Mode parameters on
page 2 of the Basic System Configuration menu. Otherwise, you can
choose to disable this item.

2.3.3

External Cache

This parameter enables or disables the external cache memory. This
item is fixed to

Enabled

and is not user-configurable if you enabled

the Fast Boot Mode parameter on page 2 of the Basic System
Configuration menu. Otherwise, you can choose to disable this item.

2-

14

User’s Guide

«
...
58
59
60
61
62
...
»

Summary of Contents for V55LA

















































































Reviews:

No comments

Related manuals for V55LA

Brand: Yamaha Pages: 87

Brand: Biostar Pages: 45

Brand: Advantech Pages: 3

Brand: AMPTRON Pages: 16

Brand: Linear Technology Pages: 10

Brand: ECS Pages: 93

Brand: Texas Instruments Pages: 13

Brand: Biostar Pages: 65

Brand: Gigabyte Pages: 36

Brand: ASROCK Pages: 257

Brand: JETWAY Pages: 45

755FXK8AA series

Brand: Foxconn Pages: 87

Brand: Icop Pages: 41

STEALTH 54LB/48

Brand: Watersnake Pages: 52

Brand: DFI Pages: 47

LanParty NFII Ultra B

Brand: DFI Pages: 120

Brand: Asus Pages: 58

Brand: Asus Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands