PCI Slots
These parameters allow you to specify the appropriate interrupt for
each of the PCI devices. You can assign IRQ5, IRQ9, IRQ10, IRQ11,
IRQ14, or IRQ15 to the slots.
Press
or
to move between fields. Press
or
to select
options.
2.6.2
PCI IRQ Sharing
When set to
Yes
, this parameter allows you to assign the same IRQ to
more than one PCI device installed in the system. When set to
No
,
you must assign different IRQs to the PCI devices.
2.6.3
VGA Palette Snoop
PCI devices support the palette snooping technique that enables the
device to control access to their palette registers. Set this parameter
to
Enabled
to activate the palette snooping function in the PCI VGA
devices installed in your system. Check your VGA card manual for
more information about this function.
2-
28
User’s Guide
Summary of Contents for V55LA
