2.5.5
Setup Password
The Setup Password prevents unauthorized access to the BIOS utility.
Set jumper JP3 to pins 1-2 to enable the
password function.
Setting a Password
1.
Highlight the Setup Password parameter and press the left- or
right-arrow key. The password prompt appears:
2.
Type a password. The password may consist of up to seven
characters.
Exercise caution when typing your password
because the characters do not appear on the
screen.
3.
Press
. A prompt asks you to retype the password to verify
your first entry.
4.
Retype the password then press
.
After setting the password, the system automatically sets the Setup
Password parameter to
Present
. The next time you want to enter the
BIOS utility, you must key-in your Setup password.
BIOS Utility
2-
25
Summary of Contents for V55LA
