Table 1-11
System Error Messages (continued)
Message
Action
Memory Error at:
MMMM:SSSS:OOO
(W:XXXX, R:YYYY)
where:
M: MB, S: Segment,
O: Offset, X/Y: write/read
pattern
Check SIMMs on the system
board. Contact your dealer.
CPU Clock Mismatch
Run Setup. Check if the CPU
clock is correct. If correct, exit
Setup and reboot the system. If
the error message reappears,
ask for technical assistance.
Onboard Serial Port 1
Conflict
Run Setup and disable the port.
Onboard Serial Port 2
Conflict
Run Setup and disable the port.
Onboard Parallel Port Conflict
Run Setup and disable the port.
Pointing Device Error
Check and connect pointing
device.
Pointing Device Interface
Error
Replace the pointing device or
contact your dealer.
Press
l
key to continue or
b
+
a
+
^
for Setup
Press
l
or
b
+
a
+
^
to enter
Setup.
Real Time Clock Error
Check the RTC chip. If it is still
good, run Setup. If not, replace
the RTC chip.
1-
30
User’s Guide
Summary of Contents for V55LA
