Cache Scheme
This parameter fixes the cache setting to
Write-back
mode.
Write-
back
updates the cache but not the memory when there is a write
instruction. It updates the memory only when these is an
inconsistency between the cache and the memory.
2.3.4
ECC/Parity Mode Selection
This parameter allows you to enable or disable the ECC and parity
check feature. You must disable this parameter if you installed SIMMs
without parity.
2.3.5
Memory at 15MB-16MB
To prevent memory address conflicts between the system and
expansion boards, reserve this memory range for the use of either the
system or an expansion board. Before setting this parameter, check
your add-on card manual to determine if your add-on card needs this
memory space. If not, set this parameter to
System Use
.
2.3.6
Plug & Play OS
Set this parameter to
Yes
if you installed the Windows 95 operating
system. Enabling this parameter allows Windows 95 to initialize and
enable non-boot plug-and-play (PnP) devices such as audio or modem
cards. BIOS initializes only boot PnP devices such as SCSI cards.
Set this parameter to
No
if you do not use Windows 95. With this
parameter disabled, BIOS initializes all boot or non-boot PnP devices.
BIOS Utility
2-
15
Summary of Contents for V55LA
