7-80
7.10
00
Exit Programming
Under
Exit Programming
, all your settings in the installer menu are saved and you exit the installer menu.
Important:
The settings you make in the installer menu are not saved until you exit the installer menu correctly.
NOTES:
To be able to exit the installer menu, the
J9
jumper plug must be plugged on to one pin.
To access the Exit Programming menu:
1.
In the installer menu, press
00
or press
or
until you find the
[0]
Exit Programming
menu
option. You see the following on the display:
This is the last option in the installer menu.
Press
. You see the following on the display:
2.
Save or discard all your settings/changes:
Save your changes by pressing
. You see the following on the display:
The
ABUS wireless alarm system
returns to the normal user display.
OR:
Discard your changes by pressing
to change the
[Y] YES
to a
[N] NO
on the display and then
press
. The
ABUS wireless alarm system
returns to the normal user display.
