![background image](http://html1.mh-extra.com/html/abus/wireless-alarm-system/wireless-alarm-system_installation-instructions-manual_3653966015.webp)
5-15
Chapter 5 Installing the ABUS wireless alarm system
Make a sketch of the object or use the architect’s plans. Enter the absolutely necessary wireless detectors defined according to
chapter 3. Install the detectors in groups. For example: first magnetic contacts, then motion sensors, then smoke detectors. Or
divide your object into areas. For example: living room, kitchen,… or ground floor, cellar,…
Name or number the detectors. For a specimen installation plan, see the end of these instructions. You will need the installation
plan again and again in the course of your activities.
This chapter answers the following questions:
•
What is what inside the
ABUS wireless alarm system
?
•
How do I install the
ABUS wireless alarm system
?
•
How do I install the power and telephone connections?
•
How do I adjust the contrast of the LCD display?
•
How do I connect the other contacts in the
ABUS wireless alarm system
?
•
How are the standby batteries used?
•
What are the effects of the different jumper settings?
5.1 What is what inside the ABUS wireless alarm system?
The following graphic shows the inner structure of the
ABUS wireless alarm system
.
1
Base plate
12
Power voltage reset jumper
2
Case tamper opening
13
LED
3
Cable hole
14
Battery jumper
4
Telephone plug
15
Control output jumper
5
Power IN
16
BUS connection
6
Flat cable
17
Internal sounder/buzzer
7
Faceplate
18
Main connector block
8
LCD light dimmer
19
Battery case screw
9
Tamper spring
20
Battery case
10
System reset jumper
21
Wall fixing
11 Loudspeaker