7-72
7.7.2
77
22
Parameters
Under
Parameters
, you program the function and the keys of the remote control. The four buttons of the remote control can be
adapted to individual requirements.
To access the Parameters menu:
1.
Select the
Key-fob
menu as described on page 8-68.
2.
Under
Key-fob
, press
22
to access the
Parameters
menu option. You see the following on the display:
3.
Select the remote control you want to reprogram and press
.
Reprogramming a remote control
Every remote control has 4 buttons, and each button can be programmed for a different function.
To change the settings of the remote control:
1.
Assign to every remote control the areas you want to operate with it. The letter “
Y
” under the number
means that the remote control can operate this area. To change the setting, press
11
,
22
or
33
.
2.
Press
to confirm. You see the following on the display:
3.
For button 1 (
±
), you can choose between the following functions:
•
None:
The button is not activated.
•
Arm:
The button externally activates all previously selected areas.
•
Stay:
The button internally activates all previously selected areas.
To select the functions, press
or
. To confirm, press
.
4.
Now select between whether an exit delay time starts at activation
(Delayed)
or whether your system is
activated immediately
(Instant)
.
5.
Press
. The system goes automatically to the next button and you see the following on the display:
6.
For button 2 (
²
), you can choose between the following functions:
None:
The button is not activated (default).
Disarm:
The button is used to disarm selected partitions.
7.
After selecting an option for the button, press
. The system automatically goes to the next button.