7-22
Chapter 6 Programming the ABUS wireless alarm system
There are several ways of programming your
ABUS wireless alarm system
:
•
At the alarm system using the keypad
•
At the alarm system using the PC software
•
Remotely, using a telephone link and PC software
Chapter 7 Settings in installer menu
This chapter describes the options and features of the installer menu of your
ABUS wireless alarm system
. The following is an
overview of the main menu options according to their sequence in the installer menu:
11
System
, page 7-23
22
Zones
, page 7-37
33
Outputs
, page 7-51
44
Codes
, page 7-57
55
Dialer
, page 7-63
66
Not active
77
Key-fobs
, page 7-71
88
Keypads
, page 7-74
99
Sounder
, page 7-74
00
Exit
, page 7-75
7.1 Introduction to installer menu
The following pages describe the menu options for programming using the buttons of your
ABUS wireless alarm system
. For
programming the
ABUS wireless alarm system
with the Downloader Software, see the separate software instructions.
To access the installer menu, deactivate the
ABUS wireless alarm system
, press the star button followed by 9, followed by 1.
99
11
You are asked to enter the installer code for the installer menu. If this has not been changed from the factory default, it is
0133
. Enter
this code and confirm by pressing the lozenge button.
00
11
33
33
You are now in the installer menu.
You can reach the items of the installer menu by scrolling with the
buttons. When you reach the required menu
option, confirm by pressing
. To exit a menu option, press
. It is faster if you use the Quick-Key function. You simply enter
the digits assigned to the menu option, e.g.: for menu option
111
(stands for
Entry delay
), press
11
11
11
.
Return to the main menu
by pressing
three times.
These instructions are shown in columns, explained in the following table:
Column header
Description
Quick-Key
The Quick-Key function is a button sequence to be pressed to reach a menu option directly. It is listed in
numerical order.
Parameter
Name and explanation of the menu option to be programmed.
Default
The default factory values. The selected values are suitable for most standard applications.
Range
The options you can select for the menu item.