Ablerex EnerSolis Series, User Manual

Page: 12 / 77

11
3.5 Installation location requirements
The converter weighs 75 kg , so please consider the weight of the
converter when choosing an installation location and method.
An appropriate installation location will optimize converter
performance, reduce the chances of malfunction, and prolong converter
lifespan. Please follow the guidelines below to choose an appropriate
location to install the converter:
1. ES 52000HC / ES 60000HC series designs comply with IP65 protection
level, so they are allowed to be installed in outdoor and humid
environments.
2. The converters should be installed in a well-vented place with no
exposure to direct sunlight and rain, and where no snow piles above
the converter. The ambient temperature must be within the range
indicated in the converter specifications to avoid overheating and
execution of derating, which would cause a decrease in power
generation efficiency, or tripping triggered by the self-protection
mechanism of overheating.
3. The converters must be mounted on a wall vertically, so when
installing, the location conditions must be checked for wall-mounting.
Please do not install the converter in a tilted or flat position. It is
recommended to install the converter in a safe and open site, and at
an eye-level height for the ease of observation, service and
maintenance inspection, and repair.
4. It must be assured that there is sufficient space to allow the heat
generated from the converter operations to dissipate. Therefore,