45
b.
After entering “Parameter settings”, “Read” must be selected
first. The parameters can only be set or changed after the
reading of the parameters is finished. Selecting “Write” will
write the settings on the screen into the converter. Select
“Back” to return to the “Function menu” page.
Note 1:
Please configure the converter ID according to the
requirements of the communication equipment to be installed.
If the ID is incorrect or repeated, the communication
equipment will not be able to connect properly.
Note 2:
Each setting value for over-voltage protection, low voltage
protection, over-frequency protection, and low frequency
protection should be configured according to the local power
system requirements. If the setting values are incorrect, they
Summary of Contents for EnerSolis Series
