ABL eMH3 Installation Manual Download

Page: 23 / 66

Installation –

Connecting the E3BWLAN |

WARNING!

Conducting all necessary checks

Now conduct all locally required checks and testing of the wallbox and its electrical installation. These include

the following tests:

Effectiveness of protective earth conductor connections

Insulation resistance

Loop impedance

Voltage drop

RCCB tripping current and tripping time

Rotating field testing

as well as additional tests according to local regulations.

Flip the housing cover up so that it clicks into the

housing and lock it with the triangular key.

ETER

CONTROL

ETER

Use the vehicle simulation adapter to conduct a func-

tional test of the charging function.

N PE

L1 L2 L3

The installation of the Wallbox eMH3 is now complete and the wallbox is ready for operation.

Connecting the E3BWLAN

For integration into an existing WiFi network, any Controller wallbox can be retrofitted with the WiFi dongle

E3BWLAN

, which can be ordered separately as an optional accessory (see "Accessories" on page 11).

WARNING!

Installing the WiFi dongle

This manual only describes how to connect the

E3BWLAN

inside the wallbox and set up the communication

with a WiFi network (see from "Set-up via Charge Point Administration application" on page 33), but not

how to configure the external WiFi network. Contact your network administrator for this task.

Connecting the WiFi dongle must be carried out by a qualified specialist electrical contractor.

Summary of Contents for eMH3



































































Search results

Summary of Contents for eMH3

Reviews:

Related manuals for eMH3

Brands by name

Popular brands

ABL eMH3, Installation Manual

Search results

Summary of Contents for eMH3

Reviews:

Related manuals for eMH3

Brands by name

Popular brands