Error resolution and maintenance –
Taking the Wallbox eMH3 out of operation |
53
Taking the Wallbox eMH3 out of operation
In case of severe malfunctions or damage to the device, you must take the Wallbox eMH3 out of operation.
To do so, proceed as follows:
1
Open the housing cover of the wallbox using the
triangular key and lower it.
T
T
T
2
Flick the pivot lever of the internal RCCB (TWIN
wallboxes: both RCCBs) into the
0
position (connec-
tion to the electricity grid is interrupted).
y
Also flip the pivot lever of the internal MCB to
position
0.
3
Flip the housing cover up so that it clicks into the
housing and lock it with the triangular key.
T
T
T
M
ETER
M
E
T
E
R
C
N
T
R
L
CONTROL
CONTROL
M
ETER
4
Open your domestic power distribution box, discon-
nect the power supply cable from the electricity grid
via the MCB and close the distribution box.
The Wallbox eMH3 is no longer connected to the electricity grid and can be removed by a qualified specialist electri-
cal contractor if required.
