| Configuring the Wallbox eMH3 –
Set-up via Charge Point Administration application
34
2
Connect an RJ45 data cable to the SBC of the Con-
troller wallbox and the computer.
y
The SBC network socket is located in the con-
nections area on the inside of the housing cover
of the Controller wallbox.
MODBUS
EN1
MODBUS
ME
TER
M
E
T
E
R
C
N
T
R
L
CONTROL
CONTROL
ME
TER
3
Open a web browser on your computer and enter
the following address:
http://169.254.1.1:8300/
.
This opens the
Charge Point Administration
online application, where you are automatically
logged in with the
Owner
role.
y
If you are unable to connect to the application,
check your computer's network settings and, if
necessary, adjust them as follows:
Network
169.254.0.0
Subnet mask
255.255.0.0
Address
169.254.1.2
4
Click the
Change role
selection menu in the top
right and select the
Installer
role.
5
Click the
Products > Installation
tab, navigate to
the bottom of the screen and click the
Add prod-
ucts
button.
y
This opens the
Products > Catalog
tab.
NOTE
Filter functions in the product catalogue
The
Products > Catalog
tab lists all compatible Extender charging stations in the
Catalog
view.
You can enter the product number of the desired charging station directly via the
Model
search field.
You can filter all displayed hits using further criteria such as
Revision
,
Product line
,
Type
, etc.
6
Search the product catalogue for the desired
charging station, select the highest revision for
that model and click the
Add products
button at
the bottom of the screen.
y
The selected charging station is now displayed
in a separate overview in the
Catalog
.
