manualshive.com logo in svg

ABL eMC2, Manual, Page: 4 / 44

Share
Download
ABL eMC2 Manual Download Page 4

iv

 

Mechanical installation of the plinth on alternative  

surfaces                                                                                                                             18

Mechanical installation of the charging pole on the  

plinth                                                                                         19

Electrical installation of the charging pole                             20

Taking into operation and charging procedure                               22

Operational safety notices                                                     22

Preparing access control via RFID

 (model variants with  

RFID module only)       .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     .     23

Preparing access control via OCPP

 (EMC444K only)

                      24

Resolving errors                                                             26

Operating status (RFID module)                                             27

Error codes for RFID module operation                                 27

Operational disruptions and solutions                                 28

Checking the internal RCCB                                                     29

Appendix                                                                                                                                          30

Specifications                                                                          30

Standards & guidelines                                                          31

Trademarks                                                                              32

Specifications for the foundation                                          33

Warranty and guarantee provisions                                      33

Intellectual Property & Copyright                                          34

Glossary & Definitions                                                             35

Disposal advice                                                                                                           36

CE certification and declaration of compliance                     37

Summary of Contents for eMC2













































Reviews:

No comments