IMpORTANT INfORMATION
4
• You must under no circumstances make any changes to the housing or the internal
wiring of the device: Any disregard of this instruction fundamentally breaches the
guarantee provisions and voids the warranty with immediate effect.
• No parts to be maintained by the user are located inside the device.
• Only have qualified, specialist personnel repair and/or install the device.
CAUTION!
This
eMC2
charging pole is intended for connection to and operation
on 230 / 400 V 50 Hz mains power.
The power supply must be insert-
ed into the housing through a suitable cable conduit or tube.
• Use a dry or slightly damp, well-wrung cloth for cleaning the charging pole. Do not
use aggressive cleaning agents, waxes or solvents (such as cleaning fluid or paint
thinner) because they can dull the displays and damage the paint finish.
• The
eMC2
charging pole must under no circumstsances be cleaned with a pres-
sure cleaner or any similar device where liquids hit the surface of the device with
high pressure.
• Regularly check the charging sockets and the separately available charging cables
of your
eMC2
charging pole for wear and tear. Should any separately available
charging cable show signs of damage, please replace it immediately: No further
charging processes are permitted in this case.
DANGER!
Should you, after installation, detect any damage to the housing, the
charging sockets or their respective charging cables, you must take
the charging pole out of operation immediately.
Please contact the service department of
ABL
!
• Relevant local regulations for operating electrical devices always apply.
Summary of Contents for eMC2
Page 42: ...Appendix 38...
Page 43: ...Appendix 39...