ABL eMC2, Manual, Page: 32 / 44

RESOLVINg ERRORS
28
The following errors are represented:
LED-SEQUENCE (FLASHING) ERROR DESCRIPTION
Transponder authorization is not possible or the sys-
tem is currently in start-up mode.
The internal control module returns an error.
The internal energy meter returns an error.
The internal GSM module (if present) returns an error.
An error has occurred during GSM/GPRS data trans-
mission.
Connection with the user platform cannot be established.
Operational disruptions and solutions
The eMC2 runs internal testing algorithms to ensure proper and safe operation. To
take suitable measures and restore operation in case of malfunction, you must first
clearly identify the type of error.
The following errors may occur:
ERROR POSSIBLE CAUSE SUGGESTED SOLUTION
LEDs
are not
functioning
The eMC2 does not
have a power sup-
ply.
The external power supply for the
eMC2
is dis-
rupted: Check the upstream circuit breaker.
The internal RCCB of the
eMC2 has been tripped:
Check the status of the RCCB and, if necessary,
switch it back on using the pivot lever .
The indicator LEDs
of the eMC2 are
faulty
Should the indicator LEDs of the eMC2 be faulty,
they must be replaced. In this case, please contact
your local distributor.
The elec-
tric vehicle
is not rec-
ognized
The charging cable
is not properly
plugged into the
vehicle
Remove the recharge plug from the vehicle and
plug it back in: Ensure that the connector sits
properly inside the vehicle socket.
The vehicle is
wrongly config-
ured
Check the vehicle settings and, if necessary, re-
set them (to factory settings).