TAkINg INTO OpERATION ANd ChARgINg pROCEduRE
25
5. Log in at the RFID module of the
eMC2
using a suitable access card. To do this,
hold the card in front of the marked area on the RFID module.
The charging process will only commence when the access card has been identified
successfully.
During connection and registration at the charging pole, the LED status indicator for
the Type 2 charging socket in use will be permanently green. When the charging pro-
cess begins, the color of the status indicator will change to blue.
PLEASE NOTE:
Should a malfunction occur during or after the charging process, this
will be indicated by the LEDs above the respective charging socket. The
following chapter describes how you can identify operational states and
errors and which measures will become necessary.
When charging is complete, unplug the cable from the vehicle socket and from the
socket of the charging pole.
Summary of Contents for eMC2
Page 42: ...Appendix 38...
Page 43: ...Appendix 39...