EN
-
28
9 Maintenance and cleaning
xFUME
®
POWER 250
9.4 Replacing the wire spool
9.5 Replacing the pressure roll
1
Open the cover.
2
Squeeze the wire spool fastener and remove from
the wire mandrel.
3
Remove the wire spool.
4
Replace the wire spool and place on the mandrel.
Ensure that the nipple hole is correctly seated on
the mandrel.
5
Squeeze the wire spool fastener and place it on
the mandrel.
If the wire spool lags following replacement, perform
the following step:
6
Loosen and adjust the Allen screw. The wire spool
must unroll smoothly.
1
Open the cover.
2
Open the clamp lever outward.
3
Open the rocker arm.
