Abicor Binzel xFUME POWER 250, Original Operating Instructions, Page: 57 / 72

xFUME POWER 250 6 Putting into operation
EN - 21
6.4 Setting the run-on time for the extraction system
6.5 Establishing the power supply
► Note the safety instructions.
 2.6 Safety instructions for the power supply on page EN - 10
For the mains voltage and the fuse protection, please refer to:

4.2 Control elements and connections on page EN - 12

Circuit diagram
Mains cable and mains plug are pre-mounted.

Fig. 2 Control elements on page EN - 12
► Connect the mains plug
(E)
.
1
Open the cover.
2
Set the run-on time on the potentiometer.
3
Close the cover.
WARNING
Electric shock caused by incorrectly installed and damaged cables
Use of damaged or improperly installed cables may result in a potentially fatal electric shock.
► Check all live cables and connections for proper installation and damage.
► Have any damaged, deformed or worn parts replaced only by a qualified electrician.
WARNING
Risk of injury due to fire
A fire may occur due to improper use or connection. They could cause major burns.
► Ensure that the operating voltage specified on the nameplate is suitable for the mains voltage.