Abicor Binzel xFUME POWER 250, Original Operating Instructions

Page: 67 / 72

xFUME POWER 250 9 Maintenance and cleaning
EN - 31
9.8 Adjusting the wire guide tube
4
Remove the screw and wire inlet tube.
5
Remove the clamping screw.
6
Remove the drive roll.
7
Push the wire guide tube from the front through the
cable assembly connection using a screwdriver.
8
Replace the wire guide tube and attach from the
outside.
9
Mount again in reverse order.
 Perform Step 1 to Step 7 .
 9.7 on page EN - 30
1
Remove the wire guide tube and adjust for the
required distance.
 Perform Step
1
to Step
7
.
2
Mount again in reverse order.
 Perform Step
7
to Step
1
.
 9.7 on page EN - 30