Abicor Binzel iROB Feed HA, Operating Instructions Manual

Page: 48 / 92

EN - 2
BAL.0737.0 • 2019-11-15
iROB Feed HA
EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification EN-3
1.1 Marking EN-3
2 Safety EN-3
2.1 Designated use EN-3
2.2 Obligations of the operator EN-3
2.3 Personal protective equipment (PPE) EN-3
2.4 Classification of the warnings EN-4
2.5 Specific safety instructions EN-4
2.6 Safety instructions for the mains connection EN-5
2.7 Warning and notice signs EN-5
2.8 Emergency information EN-5
3 Product description EN-6
3.1 Technical data EN-6
3.2 Abbreviations EN-7
3.3 Nameplate EN-8
3.4 Signs and symbols used EN-8
4 Scope of delivery EN-9
4.1 Transport EN-9
4.2 Storage EN-9
5 Functional description EN-9
6 Commissioning EN-10
6.1 Transport and installation EN-10
6.2 Connection for MIG/MAG welding EN-11
6.2.1 Connecting the cable assembly EN-11
6.2.2 Connecting the torch EN-12
6.2.3 Wire feeder EN-12
6.3 Control elements EN-14
6.3.1 iROB Feed HA control panel EN-14
7 Operation EN-15
7.1 Test display EN-15
7.1.1 MIG/MAG welding EN-16
7.2 Setup EN-17
7.2.1 Selecting the characteristic EN-17
7.3 Program menu EN-17
7.3.1 Saving and accessing a program EN-18
7.4 Locking and unlocking the control panel EN-18
7.4.1 Temporary unlocking EN-19
7.4.2 Indefinite unlocking EN-19
7.5 Defining the monitoring limits EN-19
7.5.1 The alarm menu EN-20
8 Decommissioning EN-20
9 Maintenance and cleaning EN-21
9.1 Maintenance intervals EN-21
9.2 Replacing the drive rolls EN-21
10 Troubleshooting EN-22
11 Disassembly EN-26
12 Disposal EN-26
12.1 Materials EN-26
12.2 Consumables EN-26
12.3 Packaging EN-26
13 Appendix EN-27
13.1 Interface customization EN-27
13.2 Customization of 7-segment display EN-28
13.3 Setup parameter EN-28
13.4 Synergy parameters EN-31
13.5 Alarm codes EN-32
13.6 Safety limit codes EN-34
13.7 Theoretical welding information EN-35
13.7.1 Welding with endless wire electrodes
(MIG/MAG) EN-35
14 Spare parts EN-37
14.1 Wire feeder EN-39
15 Miscellaneous EN-41
15.1 Suitable wire spools EN-41
15.2 Cable bundle EN-42
15.2.1 Cable bundle circuit diagram EN-44
16 Circuit diagram EN-45