EN - 30
BAL.0737.0 • 2019-11-15
13 Appendix
iROB Feed HA
500
Graphical interface
for selecting the corresponding interface:
XE (Easy mode)
XA (Advanced mode)
XP (Professional mode)
Facilitates access to higher setup levels:
USER: User
SERV: Maintenance
BINZEL: Binzel
551
Lock/unlock
for locking the control panel and for implementing a security code.
552
Volume
of the acoustic warning device. The volume of the warning device is set here.
Min.: Off, Max.: 10, Standard: 10
553
Contrast
(LCD 4.7“) for setting the screen contrast. Min.: −20; Max.: +20
601
Increment
for controlling the increment that can be set by the user.
Min.: 1, max.: lmax, Standard: 1
602
External parameters CH1, CH2, CH3, CH4
for managing the external parameters
(minimum value, maximum value, standard value, selected parameter).
606
U/D torch
for managing external parameters (CH1).
705
Calibration of welding circuit resistance
for calibrating the system. Press the “Main
controller” button and establish electrical contact between the wire guide tip and the
welding piece. Press the “Torch” button for at least 1 second.
751
Power display
shows the actual welding current.
752
Voltage display
shows the actual welding voltage.
760
Motor power display
shows the actual motor current.
801
Safety limit
for setting the warning and safety limits. Facilitates precise control of the
various welding phases.
Parameter
Symbol
Meaning
Tab. 14
List of setup parameters for MIG/MAG welding and MIG pulse welding
