EN - 14
BAL.0737.0 • 2019-11-15
6 Commissioning
iROB Feed HA
6.3 Control elements
The
iROB Feed HA
is available in the following models.
6.3.1 iROB Feed HA control panel
The
iROB Feed HA
control panel layout is as follows:
1
LC display
2
LED standby,
power source on
3
LED alarm
4
LED welding current
5
7-segment display
6
Main controller
7
Button for welding program
8
Button for selecting the
characteristic, synergy
9
Softkey 4
10
Softkey 3
11
Softkey 2
12
Softkey 1
Fig. 6
iROB Feed HA
control elements
Symbol
Meaning
1
Information display. The display has a header area, a display area for welding parameters and an
area for various functions.
2
Illuminates when the robot welding system is connected to the power supply and is switched on.
3
Illuminates if there is a malfunction.
4
Illuminates if there is welding voltage at the output or welding socket.
5
Displays general parameters during the startup process. Also displays settings, power and voltage
during welding as well as error codes.
6
• Turning changes the selection in the LC display.
• Pressing confirms the selection.
7
Provides 64 memory locations for saving and loading welding jobs.
13.1 Interface customization on page EN-27
8
For selecting welding characteristics:
- Type of wire
- Type of gas
- Wire diameter
9–12
Buttons with various functions. Display of the corresponding function in the LC display area
for functions.
Tab. 8
iROB Feed HA
control panel
1
2
3
4
5
7
6
8
9
10
11
12
