![background image](http://html1.mh-extra.com/html/abbott/centrimag/centrimag_operation-manual_451004081.webp)
CentriMag
TM
Circulatory Support System Operation Manual (US)
Page 81 of 126
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
Table 9: Event Types for the System data logger
Name
Symbol
Event
Alert Deactivated
This event is generated when an alert is no longer
active (i.e. the condition is resolved).
Setting Change
This event is generated whenever a setting is
changed e.g. Pump speed, pressure alarms, etc.
b) Timestamp
The System records the time that the event was logged. The time used is the System
clock. For information on setting the System clock, see
Section 7.25
c) Date stamp
The System records the date the event took place. For information on setting the System
clock, see
Section 7.25
d) Details on the event.
The System records details about the event. This includes such detail as the alarm name
and the exact parameter changes that have been made.
To navigate through the list of logged events, use the
UP ARROW
and
DOWN ARROW
on the right of the Monitor to move up and down through the list of logged events and the
UP ARROW
and
DOWN ARROW
on the left of the Monitor to move between pages of
data.
In addition to events, the System also records flow every 5 seconds and displays this on a
graph. The graph will display one hour of flow data. The graph will center on the event that
is highlighted; to display older flow data scroll down through the list of events until the
required epoch of flow is displayed.