CentriMag
TM
Circulatory Support System Operation Manual (US)
Page 39 of 126
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
Table 6: Features of the Console, Monitor, and Flow Probes
FEATURE
NAME
DESCRIPTION
LOCATION
Increase
This keypad is used to select/modify
the value for the displayed item to be
adjusted.
On the Console’s
Front Panel
On the Monitor’s
Front Panel
Emergency
Pump Stop
When depressed for at least 5
seconds, this keypad will cause the
Pump RPM to immediately be set to
zero causing the Pump to stop.
While the Pump is running, an audio
alarm will sound while the keypad is
depressed, indicating that the Pump
will be stopped soon.
On the Console’s
Front Panel
On the Monitor’s
Front Panel
ON/OFF Button
The power switch is recessed and
covered to prevent inadvertent
actuation. Switching to OFF disables
all functions and displays except for
the battery charging function.
This power switch should not be
used to stop the Pump. To stop the
Pump use either RPM Decrease or
Emergency Pump Stop buttons.
On the Console’s
Back Panel
Indicators
Pump Speed
Pump speed (
RPM
) Display: The
Top portion of the Console’s display
is the Pump Speed; below the digital
speed indication, a bar graph
provides a representation of the
Pump speed in RPM.
On the front panel
of the Console and
on the Monitor
screen
Flow Rate
Flow rate (
LPM
): The top portion of
the Flow Display is a 3-digit numeric
display that provides a digital
representation of the Pump Flow in
LPM. Below the digital flow
indication, a bar graph provides a
representation of the blood flow in
LPM. Markers show the current
settings of the Maximum and
Minimum flow limits.
On the front panel
of the Console and
on the Monitor
screen