IEC17000108-1-en.vsd
IEC17000108 V1 EN-US
Figure 36:
Selecting the function category
6.
To browse the function blocks, scroll the list with
and
.
Function blocks available depend on the application configuration. To move back to the list,
press
.
7.
To select a function block, press
.
IEC17000109-1-en.vsd
IEC17000109 V1 EN-US
Figure 37:
Function block settings
The # character on the right indicates that the parameter belongs to a setting group.
8.
To browse the settings, scroll the list with
and
.
9.
To edit the selected setting, press
.
•
In case of a parameter that is not part of a setting group, the parameter is activated for
editing.
•
In case of a setting group parameter, the editing dialog shows the value of the setting in
all available setting groups, but the user can edit only the value in the selected setting
group. The active setting group is marked with an asterisk *.
Section 7
1MRK 500 131-UEN Rev. C
Operating procedures
48
Switchgear control unit SAM600-IO
Operation manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved