![background image](http://html1.mh-extra.com/html/abb/relion-sam600-io/relion-sam600-io_operation-manual_3395302040.webp)
IEC15000063.vsdx
IEC15000063 V1 EN-US
4.
Edit the string using the on-screen keyboard.
5.
Select
OK
on the on-screen keyboard or press
while the string editing field is focused to
accept the entered string is accepted and the editing dialog is closed.
5.1.9.3
Editing enumerated values
AMU0600417 v6
1.
Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press
or
to change the value of an active enumerated value.
One press changes the enumerated value by one step in the parameter specific order.
5.1.9.4
Changing time settings in LHMI
GUID-0EE1EA01-D75F-4F3E-825F-ACD59D5A160F v3
If there is a need to change the time setting in the LHMI (
Main menu /Configuration /Time /
System time /SYSTEMTIME:1
) the change will take affect immediately. To confirm the new setting
press
. To remove the change, press
.
5.1.10
Saving settings
GUID-80F52D5D-539E-478E-97AC-4E33897E5085 v6
Editable values are stored in the non-volatile flash memory. Most of the parameter changes take
effect immediately after storing, but some parameter changes require application restart. Values
stored in the flash memory remain in effect after reboot as well.
1.
Press
to confirm any changes.
2.
Press
to move upwards in the menu tree or
to enter the Main Menu.
3.
To save the changes in non-volatile memory, select Yes and press
.
IEC13000245-1-en.vsd
GUID-8D804426-35FD-48A8-9E63-CCBB625327EA V1 EN-US
Figure 23:
Confirming settings
•
To exit without saving changes, select No and press
.
•
To cancel saving settings, select Cancel and press
.
Pressing Cancel in the Save changes dialog closes only the Save changes dialog
box, but the IED remains in editing mode. All the changes applied to any setting are
not lost and the user can continue to change settings. To leave the change setting
mode, select No or Yes in the Save changes dialog.
Section 5
1MRK 500 131-UEN Rev. C
Using the HMI
34
Switchgear control unit SAM600-IO
Operation manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved