![background image](http://html1.mh-extra.com/html/abb/relion-sam600-io/relion-sam600-io_operation-manual_3395302041.webp)
After changing the parameters marked with !, the IED restarts automatically for the
changes to take effect.
5.1.11
Clearing and acknowledging
AMU0600425 v10
The Clear button is used to reset, acknowledge or clear all messages and indications, including
LEDs and latched outputs as well as registers and recordings. Press the Clear button to activate a
selection menu, and select the wanted clearance or reset function. Events and alarms assigned to
alarm LEDs are cleared with the Clear button as well.
1.
Press
to activate the Clear view.
IEC17000246-1-en.vsd
IEC17000246 V1 EN-US
Figure 24:
Clear view
The content of the Clear menu depends on the configuration configured with PCM600.
2.
Select the item to be cleared with
or
.
3.
Press
, select OK to confirm the selection or Cancel to cancel the selection, and press
.
4.
Repeat steps 2 and 3 to clear other items.
5.1.12
Using the local HMI help
AMU0600421 v8
1.
Press
to open the help view.
2.
Scroll the text with
or
if the help text exceeds the display area.
3.
To close the help, press
.
The help dialog is also closed when the display timeout expires.
1MRK 500 131-UEN Rev. C
Section 5
Using the HMI
Switchgear control unit SAM600-IO
35
Operation manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved