manualshive.com logo in svg

ABB MicroFlex e190, User Manual, Page: 91 / 210

Share
Download
ABB MicroFlex e190 User Manual Download Page 91

Installation checklist   91 

8

Installation checklist

Checklist

Check the mechanical and electrical installation of the drive before start-up. Go 
through the checklist together with another person.

WARNING!

 Only qualified electricians are allowed to carry out the work 

described below. Read the safety instructions on the first pages of this manual 

before you work on the unit. Ignoring the safety instructions can cause injury or death. 
Open the main disconnector of the drive and lock it to open position. Measure to 
ensure that the drive is not powered.

Check

MECHANICAL INSTALLATION

The ambient operating conditions are allowable. (See 

Mechanical installation, 

Technical data

: 

Ratings

, 

Ambient conditions

.)

The unit is fastened properly to the cabinet. (See 

Cabinet construction 

and

 

Mechanical installation.

)

The cooling air will flow freely.

The motor and the driven equipment are ready for start. (See 

Planning the electrical 

installation, Technical data

: 

Motor connection

.)

ELECTRICAL INSTALLATION

 (See 

Planning the electrical installation, Electrical installation: 

AC input / DC input, motor and brake.

)

The capacitors are reformed if stored over one year (ask local ABB representative for 
more information).

The drive is grounded properly.

Summary of Contents for MicroFlex e190



















































































































































































































Reviews:

No comments