Operation of the L240
32
Example 4:
External alarm
17:30:54 Cct 3
Restore
The circuit group stored after an external alarm has been deleted
22:17:44 Area1
Reset
A reset was undertaken in area 1
22:15:38 Area1
Unset
Area 1 was unset at 22:15
21:40:40 Cct 3
Ext. Alarm
Circuit 3 triggered an external alarm at 21:40
17:35:01 Area1
Ext Set
Area 1 was set externally at 17:35
Submenu “2=Filter”
In
submenu “2=Filter”
excerpts can be selected from the event log as
selected in the keypad or can be output on the printer interface.
1 = Circuit
2 = User
3 = Keypad
4 = Date
“1=Circuit”:
Only the events for the selected circuit are output (e.g.
triggered by an alarm).
“2=User”:
Only the operations performed by the selected user are
output (e.g. access to access level 1).
“3=Keypad”:
Only the operations performed on the selected keypad are
output (e.g. access of the individual users in access level 1).
“4=Date”:
Only events on a selected date are output
Submenu “3=Access Log”
In submenu “3=Access Log” all access operations for each Evaluation
Module L240/BS can be displayed on the display of the Keypad L240/PT or
can be printed via the printer interface. This submenu is only shown if at
least one Evaluation Module L240/BS is enabled in the programming level
(see chapter 9 “Management of the chip key/keypad code”).
<
button
<
button
<
button
<
button
