LAN Interface L240/IP
106
In the example configuration, the following IP addresses are assumed (can
vary according to the network):
PC:
192.168.3.1
L240/IP: 192.168.3.3
Gateway: 192.168.3.4
Generally, the properties of the Internet protocol for the PC settings are set
to “Obtain an IP address automatically”. This setting must be checked and a
fixed IP address setting may need to be set.
The following example shows how the IP address of the computer is
changed (Example: Windows XP).
Note: The settings must be made by a person with appropriate experience
in the configuration of PCs and network technology. Consult your system
administrator if required.
Access the network settings:
Start – Control Panel - Network and Internet Connections
Double click on the respective network connection under
LAN or High-
Speed Internet
and click on
Properties
.
The window >
Properties of LAN Connection
opens.
Select
Internet Protocol (TCP/IP)
from the list and click on
Properties
.
Activate
“
Use the following IP address
” and enter the new IP address (in
our example the
IP address 192.168.3.1
) and
Subnet Mask
.
IMPORTANT:
Note the old IP setting so that you can reactivate it!
15.5 Setting the network
parameters on the L240
The IP addresses and further specification must correspond with one
another in the Intrusion Alarm Panel and in WIN-PC.
In menu Remote (Engineer menu “7=Remote”), select the function
“01=Connection”. In this submenu, the connection is activated and the
type of communication is set. Select “Ethernet”.
Connection
Off/On-On
Press button
1
to switch on the connection
Connection
Type-Ethernet
Press button
2
to set type=Ethernet
In submenu “02=Enable”, the “Auto” parameter should be selected.
Operations
Enable-Auto
Press button
2
to set enable to “Auto”
In submenu “03=Auth Code”, an enable code can be entered. As enable
occurs without code, this function is not relevant and no entries must be
made.
Auth Code
Auth Code-000
