Operation of the L240
27
6.2.3 Button 3 “Disp Cct Off”
Button
3
shows when the detector circuit is switched off. Both the internally
set as well as the externally set switched off circuits are displayed. You can
page using the
><
buttons. Only the switched off circuits, which are located
in the same area as the keypad, can be displayed.
Cct 2
Off
All switched off circuits appear on the display, e.g. circuit 02 is switched off
and does not trigger an alarm. If a text is assigned for the circuit, it will be
displayed.
6.2.4 Button 4 “Input PIN”
Button
4
is used for entering a 4-digit user code to gain access to access
level 1. The code entry is acknowledged with button
!
. In the default delivery
state the user PIN number 1 is enabled and set to
“
1111
”
. In total up to
seven user PINs can be enabled (see menu item “08 = User Auth”, chapter
8.1.8). Every access is stored along with the user number in the event log.
Input PIN:
6.2.5 Button 5 “Disp Cct
Fault”
Button
5
displays malfunctioning / open circuits. Detector circuits of type
“Intrusion” and “Personal attack” are displayed. You can page using the
><
buttons. Only the interrupted detector circuits, which are located in the same
area as the keypad, can be displayed.
Cct 5
Fault
On the display all malfunctioning detector circuits appear, e.g. circuit 05. If a
text has been assigned for the circuit, it will be displayed.
If a circuit malfunctions, after button
X
is pressed the prompt for deleting any
stored signals appears (e.g. glass break detector).
4
= Reset
