ABB FMBT-21, User Manual

Page: 63 / 92

Default Description Name/Value No.
N/A These parameters are not used by the adapter
module when using the NONE protocol. Reserved 16
…
26
0 = Done Validates any changed adapter module configura-
tion parameter settings. After refreshing, the value
reverts automatically to 0 = Done. FBA A/B par refresh 27
Note: This parameter cannot be changed while the
drive is running.
Refreshing done 0 = Done
Refreshing 1 = Refresh
N/A Read-only. Displays the parameter table revision
of the fieldbus adapter module mapping file stored
in the memory of the drive. In format xyz, where
x = major revision number
y = minor revision number
z = correction number
OR
in format axyz, where
a = major revision number
xy = minor revision numbers
z = correction number or letter. FBA A/B par table ver 28
Parameter table revision
N/A Read-only. Displays the drive type code of the
fieldbus adapter module mapping file stored in the
memory of the drive. FBA A/B drive type
code 29
Drive type code of the fieldbus adapter module
mapping file
N/A Read-only. Displays the fieldbus adapter module
mapping file revision stored in the memory of the
drive in decimal format. FBA A/B mapping file
ver 30
Mapping file revision
NONE – Start-up 63