24
ENGINEERING MODE
The Engineers Code is
5344.
In the full EN54 version. In order to gain access to the engineering menu, remove the front of the fire panel by
removing the two 4mm screws on the bottom edge of the front.
In order to enter the engineers code, the password screen must be activated. This is done by:-
-
Pressing any of buttons 1, 2, 3 or 6.
PLEASE ENTER VALID
PASSWORD
- - - -
^
The number represented by each button is displayed on the fascia above the button.
-
Enter the engineers code
If the correct code is entered, the display will show the following:-
Engineers
Switch to ON
In order to gain access to the Engineers
Functions, the ’Engr’s Switch’ must be
switched to the ‘ON’ position.
This is located on the Eurofire EN54
PCB.
The front cover must be removed in
order to access the switch.
Fig 1. Location of Engr’s Switch
