ABB Eurofire EN54, User And Engineers Instructions

Page: 22 / 47

22
PANEL SPECIFICATION
Panel Order Code FEUN-4 FEUN-8 FEUN-12 FEUN-16
No. of Zones
(25 detectors per zone max)
4 Zone
conventional /
2wire
8 Zone
conventional /
2wire
12 Zone
conventional /
2wire
16 Zone
conventional /
2wire
No. of alarm lines 4 (expandable to 16 programmed in groups of 4)
Maximum alarm load Total = 1.25A. Maximum per line or circuit = 1A
Auxiliary outputs
•
Two sets of volt-free aux. programmable contacts (rated 2A @ 30V d.c.)
•
Two sets of volt-free fault contacts (rated 2A @ 30V d.c.)
Inputs Class change, Bomb Alert and Programmable
Display 4 x 20 character LCD + zone fire and fault LED’s
Mains input voltage 10%, -6%. 50Hz
Output d.c. voltage 24V d.c. @ 250mA, 12V d.c @ 250mA
Battery size 12V 7AH x 2 (connected in SERIES)
Panel aesthetics Metal back box with moulded polycarbonate front panel in cool grey
Panel dimensions (mm) hwd
469 x 373 x 103
Standby duration
Minimum 24 Hours (please contact technical sales for further information.)
Detector units Apollo 60 and Orbis series smoke and heat with diode base. 220-680 Ohm call-
point
* For networking please specify the isolated CAN Network driver.
Alarm Sense (2-Wire) Specification.
Product code FEWN-4 FEWN-8 FEWN-12 FEWN-16
No. of zones 4 Zone 8 Zone 12 Zone 16 Zone
Detectors per zone 25 maximum 25 maximum 25 maximum 25 maximum
Sounders per zone 25 maximum 25 maximum 25 maximum 25 maximum
Sounder current Low
4ma Medium
8ma High
16ma
note [1]
Sounders per panel 200 160 80 note [1]
Inputs Class change, Bomb Alert, Programmable
Display 4 x 20 character LCD + zone fire & fault LED’s and system LED’s
Mains input voltage 230 vac = 10% -6% 50Hz
DC output auxiliary voltage 24V d.c. @ 250mA, 12V d.c @ 250mA
Battery size 12V 7AH x 2 (connected in SERIES)
Battery standby Minimum 24 Hours (please contact technical sales for further information.)
Panel dimensions (mm) hwd 469 x 373 x 103
Programmable features Extensive via buttons and LCD display
CAN Network Panel and repeater combinations via CAN 2.0b link
Ancillary outputs:
Alarm Lines 4 note [2]
Alarm current total Is 1.25A-Zone Sounder Current note [3]
Auxiliary outputs 2 sets of volt free contacts, rated @ 2A 30Vdc
Fault outputs 2 sets of volt free contacts, rated @ 2A 30Vdc
Notes.
[1] – Current is dependent on sound level and tone outputs. Total current must not exceed 80 high output sound
levels. Or 200 low output sound levels.
[2] – Alarm lines – AL1 to AL4.
[3] – Total Panel Alarm Current is 1.25A, therefore zone sounder current must be taken into account when
deciding how much loading is allowed on Alarms AL1 to AL4.
Alarmsense is a registered trade name of Apollo Fire Detectors Ltd.