ABB CL Series, Applications Manual

Page: 99 / 428

Commissioning
96
1SVC 440 795 M1100
Changing the CL-NET network configuration
The configuration of the CL-NET network can be modified at
any time at station 1, physical location 1.
X
The NET parameters are modified as described for
inputting parameters for the first time.
Station addresses in the STATIONS menu are changed as
follows:
X
Go to the physical location which is to be modified.
X
Press the OK button.
X
Select the required station number with the
Í
and
Ú
cursor buttons and confirm your input with the OK button.
X
Configure all CL-NET stations again using the
CONFIGURATION menu.
h Existing station numbers can only be modified to free,
non-assigned station numbers. If all eight numbers are
assigned, all station numbers which are to be modified
must be set to zero. Thereafter, all station numbers can be
reassigned. (Display system sets all station numbers to
zero which are assigned a physical location behind the
leading zero.)
h Further information concerning the CL-NET network topic
can be found in chapter “CL-NET network, COM-LINK
serial connection”, page 319.