ABB CL Series, Applications Manual

Page: 360 / 428

Activating and deactivating
the P buttons
357
1SVC 440 795 M1100
Activating and
deactivating the P buttons Even though the cursor buttons (P buttons) have been set as
pushbutton actuator inputs in the circuit diagram, this
function is not activated automatically. This prevents any
unauthorised use of the cursor buttons. The P buttons can be
activated in the System menu.
The P buttons are activated and deactivated via the
P buttons menu.
X
Press DEL and ALT to call up the System menu.
X
Select the SYSTEM menu.
X
Move the cursor to the
P BUTTONS
menu.
Activating the P buttons
If the display system shows
P BUTTONS å
in the display,
the P buttons are active.
X
Otherwise select
P BUTTONS
and press OK .
The display system changes the display to
P BUTTONS å
and the P buttons are activated.
X
Press ESC to return to the status display.
The P buttons are only active in the status display and the
text display. In this display you can use the P buttons to
activate inputs in your circuit diagram.
Deactivating the P buttons
X
Select
P BUTTONS å
and press OK .
The display system changes the display to
P BUTTONS
and
the P buttons are deactivated.
h If the display system is password-protected you cannot
open the System menu until you have “unlocked” it.
DEBOUNCE å Æ
P BUTTONS
RUN MODE
CARD MODE
æ
DEBOUNCE å Æ
P BUTTONS
RUN MODE
CARD MODE
æ
DEBOUNCE å Æ
P BUTTONS å
RUN MODE
CARD MODE
æ
h If you are loading a circuit diagram from the memory
module or via CL-SOFT to the display system or if you are
deleting a circuit diagram in the display system the
P buttons are automatically deactivated.