ABB CL Series, Applications Manual

Page: 278 / 428

Screen overview
275
1SVC 440 795 M1100
Example program 2 – Different display types with
password request for a screen
The program consists of four screens in which the static text is
displayed in different ways. The fourth screen contains a
password request. The individual screens can be selected with
the cursor buttons
Í
and
Ú
. The screen change was defined
in the button editor (
a
section “Button editor”, page 317).
The defined password is requested when exiting screen 4. In
this case, this is the number 2 which must be confirmed with
OK . It is not possible to scroll through the screens without
entering the password. You can leave the password request
dialog by pressing
ESC , which will cause a return to the
previous screen.
Standard path: C:\Program files\CL-SOFT\Samples\
Program:
StaticText_Prog_02.e60
Screen 1
Screen 1 shows a static text in normal font size.
Screen 2
Screen 2 shows a static text enlarged.
Screen 3
Screen 3 shows three static texts in different font sizes.
Screen 4
Screen 4 shows four static texts arranged vertically.
Example program 3 – Different display types with
screen activation using a counter
The program consists of four screens in which the static text
is displayed in different ways. The individual screens are
activated via the counter C01. This has the value 5 as the
upper switch value SH. The pulse for activating the screens
is supplied by timing relay T01. The possible counter values
are therefore 0 to 5. Counter value 1 activates screen 1,
counter value 2 screen 2 etc. If the upper switch value of the
counter has been reached, timing relay T02 is started which
resets the counter. This therefore produces a continuous
loop. The timing relay T02 causes a reset delay of the
counter.
Four static
texts arranged
one under the
other!!