38 - Contact readiness Auto Test
Figure 71
Figure 72
Reset output contacts (= open) and LEDs (= off).
Turn on all the LEDs in sequence (output and input)
Closure and shutdown of the two output contacts in sequence, switching on the relative
LEDs.
Restore initial conditions
The Autotest command closes the contacts regardless of the configuration set by the user
Autotest command that activates the automatic sequence of output tests (contacts and
LEDs) and input test (LED), and includes the following operations:
The output of 2K-1 module consists of 2 contacts K11-K12 and K13-K14. Configure these two
output contacts as per following to control the fans.
C
Summary of Contents for AKD-10
