ABB ACS880-04FXT, Hardware Manual

Page: 153 / 196

Contact your local ABB distributor for further information on environmental aspects and
recycling instructions for professional recyclers. End of life treatment must follow international
and local regulations.
Applicable standards
The drive complies with the following standards.
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy EN 61800-5-1:2007
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments. EN 60204-1:2006
+A1:2010
Provisions for compliance: The final assembler of the machine is responsible for
installing emergency-stop device.
• emergency-stop device
• supply disconnecting device
• IP00 drive module into a cabinet.
Degrees of protection provided by enclosures (IP code) EN 60529:1991 + A2:2013
Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods EN 61800-3:2004 +
A1:2012
UL Standard for Safety, Power Conversion Equipment, fourth edition UL 508C: 2016
General Requirements - Canadian Electrical Code, Part II CSA C22.2 No. 0-10
Industrial control equipment
CSA C22.2 No. 14-13
Adjustable Speed Drives CSA 22.2 No. 274-13
Markings
These markings are attached to the drive:
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC requirements,
see the additional information concerning the drive EMC compliance (IEC/EN 61800-3).
TÜV Safety Approved mark (functional safety)
Product contains Safe Torque Off and possibly other (optional) safety functions which are certified
by TÜV according to the relevant functional safety standards. Applicable to drives and inverters;
not applicable to supply, brake or DC/DC converter units or modules.
Electronic Information Products (EIP) green mark
The product complies with the People’s Republic of China Electronic Industry Standard (SJ/T 11364-
2014). The product does not contain toxic and hazardous substances or elements above the
maximum concentration values, and it is an environmentally-friendly product which can be recycled.
WEEE mark
At the end of life the product should enter the recycling system at an appropriate collection point
and not placed in the normal waste stream.
Note: The ACS880-04F modules are UL marked.
Technical data 153