ABB ACS880-04F-504A-3, Hardware Manual

Page: 145 / 202

Typical power cable sizes
The table below gives typical copper and aluminum cable types with concentric copper
shield for the drive modules with nominal current. See also section
Terminal and entry
data for the power cables (page 146) .
US
2)
IEC
1)
ACS880-
04F-…
Al cable type Cu cable type Al cable type Cu cable type
AWG/kcmil AWG/kcmil mm
2
mm
2
U
n
= 400 V
2×700 MCM or 3×350 MCM 2×500 MCM or 3×250 MCM 3×(3×150) 3×(3×95) 504A-3
3×400 MCM or 4×250 MCM 2×600 MCM or 3×300 MCM 3×(3×185) 3×(3×120) 584A-3
3×400 MCM or 4×250 MCM 2×700 MCM or 3×350 MCM 3×(3×240) 3×(3×150) 649A-3
3×500 MCM or 4×300 MCM 3×500 MCM or 4×300 MCM 4×(3×185) 3×(3×185) 725A-3
3×700 MCM or 4×500 MCM 3×600 MCM or 4×400 MCM 4×(3×240) 3×(3×240) 820A-3
4×500 MCM 3×600 MCM or 4×400 MCM 4×(3×240) 3×(3×240) 880A-3
U
n
= 500 V
2×600 MCM or 3×300 MCM 2×400 MCM or 3×4/0 3×(3×150) 3×(3×95) 459A-5
2×700 MCM or 3×350 MCM 2×500 MCM or 3×250 MCM 3×(3×150) 3×(3×95) 502A-5
3×500 MCM or 4×300 MCM 2×600 MCM or 3×300 MCM 3×(3×185) 3×(3×120) 582A-5
3×600 MCM or 4×400 MCM 2×700 MCM or 3×350 MCM 3×(3×240) 3×(3×150) 6354-5
3×600 MCM or 4×400 MCM 3×500 MCM or 4×300 MCM 4×(3×185) 3×(3×185) 715A-5
4×500 MCM 3×600 MCM or 4×400 MCM 4×(3×240) 3×(3×240) 820A-5
4×500 MCM 3×600 MCM or 4×400 MCM 4×(3×240) 3×(3×240) 880A-5
U
n
= 690 V
2×350 MCM or 3×4/0 2×250 MCM or 3×2/0 3×(3×120) 2×(3×120) 329A-7
2×400 MCM or 3×4/0 2×300 MCM or 3×3/0 3×(3×120) 2×(3×120) 369A-7
2×500 MCM or 3×250 MCM 2×350 MCM or 3×4/0 2×(3×120) 2×(3×95) 429A-7
2×600 MCM or 3×300 MCM 2×400 MCM or 3×4/0 3×(3×150) 3×(3×95) 470A-7
2×700 MCM or 3×350 MCM 2×500 MCM or 3×250 MCM 3×(3×185) 3×(3×120) 522A-7
3×500 MCM or 4×300 MCM 2×600 MCM or 3×300 MCM 3×(3×185) 3×(3×150) 590A-7
3×500 MCM or 4×300 MCM 2×700 MCM or 3×350 MCM 3×(3×240) 3×(3×150) 650A-7
3×600 MCM or 4×400 MCM 3×500 MCM or 4×300 MCM 4×(3×185) 3×(3×185) 721A-7
The cable sizing is based on max. 9 cables laid on a cable ladder side by side, three ladder type trays
one on top of the other, ambient temperature 30 °C (86 °F) PVC insulation, surface temperature 70 °C
(158 °F) (EN 60204-1 and IEC 60364-5-52). For other conditions, dimension the cables according to
local safety regulations, appropriate input voltage and the load current of the drive.
1)
The cable sizing is based on NEC Table 310-16 for copper wires, 75 °C (167 °F) wire insulation at 40 °C
(104 °F) ambient temperature. Not more than three current-carrying conductors in raceway or cable
or earth (directly buried). For other conditions, dimension the cables according to local safety regula-
tions, appropriate input voltage and the load current of the drive.
2)
Temperature: For IEC, select a cable rated for at least 70 °C maximum permissible temperature of con-
ductor in continuous use. For North America, power cables must be rated for 75 °C (167 °F) or higher.
Voltage: 600 V AC cable is accepted for up to 500 V AC. 750 V AC cable is accepted for up to 600 V AC.
1000 V AC cable is accepted for up to 690 V AC.
Technical data 145