ABB ACS880-04F-504A-3, Hardware Manual

Page: 150 / 202

Ambient conditions
Environmental limits for the drive are given below. The drive is to be used in a heated,
indoor, controlled environment or the heatsink can be placed outdoors when it is
protected according to these limitations.
Transportation
(in the protective pack-
age)
Storage
(in the protective pack-
age)
Operation
(installed for stationary
use)
- - For TN and TT neutral-
grounded network sys-
tems and IT non-corner-
grounded network sys-
tems: 0 to 4000 m
(13123 ft) above sea level Installation site altitude
For corner-grounded
network systems: 0 to
2000 m (6561 ft) above
sea level
Above 1000 m (3281 ft):
see section
When is de-
rating neces-
sary (page 133)
-40…+70 °C
(-40…+158 °F) -40… 70 °C
(-40…+158 °F) -15…+55 °C (5…131 °F).
No frost allowed. See
section
When is derating
necessary (page 133)
Surrounding air temper-
ature
Max. 95% Max. 95% 5…95% Relative humidity
No condensation allowed. Maximum allowed relative humidity is 60% in the
presence of corrosive gases.
IEC 60721-3-2:1997 IEC 60721-3-1:1997 IEC/EN 60721-3-3:2002 Contamination levels
Class 2C2 Class 1C2 Class 3C2 Chemical gases
Class 2S2 Class 1S3. (packing must
support this, otherwise
1S2) Class 3S2. No conductive
dust allowed. Solid particles
2 Pollution degree
IEC/EN 60664-1
60…106 kPa (0.6 … 1.05
atmospheres) 70…106 kPa (0.7 … 1.05
atmospheres) 70…106 kPa (0.7 … 1.05
atmospheres) Atmospheric pressure
Max. 3.5 mm (0.14 in)
(2…9 Hz), max. 15 m/s
2
(49 ft/s
2
) (9…200 Hz) si-
nusoidal
Max. 1 mm (0.04 in) (5 …
13.2 Hz), max. 7 m/s
2
(23 ft/s
2
) (13.2…100 Hz)
sinusoidal
Max. 0.1 mm (0.004 in)
(10…57 Hz), max.
10 m/s
2
(33 ft/s
2
)
(57…150 Hz) sinusoidal
Vibration
IEC 60068-2-6:2007,
EN 60068-2-6:2008
With packing max.
100 m/s
2 (330 ft/s 2 ),
11 ms
With packing max.
100 m/s
2 (330 ft/s 2 ),
11 ms
Not allowed Shock
IEC 60068-2-27:2008,
EN 60068-2-27:2009
100 mm (4 in) for weight
over 100 kg (220 lb) 100 mm (4 in) for weight
over 100 kg (220 lb) Not allowed Free fall
150 Technical data