ABB ACS800-04, Hardware Manual

Page: 96 / 118

Technical data
96
UL class T and L fuses
ACS800-U4 type Input
current
Fuse
A A V Manufacturer Type UL class
Three-phase supply voltage 208 V, 220 V, 230 V , 240 V
-0080-2 201 250 600 Bussmann JJS-250 T
-0100-2 239 300 600 Bussmann JJS-300 T
-0120-2 285 400 600 Bussmann JJS-400 T
-0140-2 391 500 600 Bussmann JJS-500 T
-0170-2 428 600 600 Bussmann JJS-600 T
-0210-2 506 600 600 Bussmann JJS-600 T
-0230-2 599 800 600 Ferraz A4BY800 L
-0260-2 677 800 600 Ferraz A4BY800 L
-0300-2 707 900 600 Ferraz A4BY900 L
Three-phase supply voltage 380 V, 400 V, 415 V, 440 V, 460 V , 480 V or 500 V
-0170-5 175 250 600 Bussmann JJS-250 T
-0210-5 220 300 600 Bussmann JJS-300 T
-0260-5 267 400 600 Bussmann JJS-400 T
-0270-5 293 500 600 Bussmann JJS-500 T
-0300-5 331 500 600 Bussmann JJS-500 T
-0320-5 397 500 600 Bussmann JJS-500 T
-0400-5 467 600 600 Bussmann JJS-600 T
-0440-5 501 800 600 Ferraz A4BY800 L
-0490-5 542 800 600 Ferraz A4BY800 L
-0550-5 614 900 600 Ferraz A4BY900 L
-0610-5 661 900 600 Ferraz A4BY900 L
Three-phase supply voltage 525 V, 575 V or 600 V
-0140-7 117 200 600 Bussmann JJS-200 T
-0170-7 146 200 600 Bussmann JJS-200 T
-0210-7 184 250 600 Bussmann JJS-250 T
-0260-7 199 300 600 Bussmann JJS-300 T
-0320-7 273 500 600 Bussmann JJS-500 T
-0400-7 325 500 600 Bussmann JJS-500 T
-0440-7 370 500 600 Bussmann JJS-500 T
-0490-7 407 600 600 Bussmann JJS-600 T
-0550-7 463 600 600 Bussmann JJS-600 T
-0610-7 513 700 600 Ferraz A4BY700 L
Note 1: See also Planning the electrical installation : Thermal overload and short-circuit
protection .
Note 2: In multicable installations, install only one fuse per phase (not one fuse per
conductor).
Note 3: Larger fuses than the recommended ones must not be used.
Note 4: Fuses from other manufacturers can be used if they meet the ratings and the
melting curve of the fuse does not exceed the melting curve of the fuse mentioned in the
table.
PDM code: 00096931-G