ABB ACS800-04, Hardware Manual

Page: 101 / 118

Technical data
101
Materials
Drive enclosure • PC/ABS 2.5 mm, colour NCS 1502-Y (RAL 90021 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm, thickness of coating 100 micrometres,
colour NCS 1502-Y
Package Plywood and wood. Plastic covering of the package: PE-LD, bands PP or steel.
Disposal The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors (C1-1 to C1-x) contain electrolyte and the
printed circuit boards contain lead, both of which are classified as hazardous waste within
the EU. They must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
Applicable standards
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standards EN 61800-5-1 and EN 60204-1.
• EN 61800-5-1 (2003) Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy
• EN 60204-1 (2006) Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device
- the ACS800-04/04M/U4 into a cabinet.
• EN 60529: 1991 (IEC 529) Degrees of protection provided by enclosures (IP code)
• IEC 60664-1 (2007) Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
• EN 61800-3 (2004) Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific
test methods
• UL 508C (2002) UL Standard for Safety, Power Conversion Equipment, second edition
• CSA C22.2 No. 14-05 Industrial control equipment
US patents
This product is protected by one or more of the following US patents:
4,920,306 5,301,085 5,463,302 5,521,483 5,532,568 5,589,754
5,612,604 5,654,624 5,799,805 5,940,286 5,942,874 5,952,613
6,094,364 6,147,887 6,175,256 6,184,740 6,195,274 6,229,356
6,252,436 6,265,724 6,305,464 6,313,599 6,316,896 6,335,607
6,370,049 6,396,236 6,448,735 6,498,452 6,552,510 6,597,148
6,741,059 6,774,758 6,844,794 6,856,502 6,859,374 6,922,883
6,940,253 6,934,169 6,956,352 6,958,923 6,967,453 6,972,976
6,977,449 6,984,958 6,985,371 6,992,908 6,999,329 7,023,160
7,034,510 7,036,223 7,045,987 7,057,908 7,059,390 7,067,997
7,082,374 7,084,604 7,098,623 7,102,325 D503,931 D510,319
D510,320 D511,137 D511,150 D512,026 D512,696 D521,466.