ABB ACS800-04, Hardware Manual

Page: 100 / 118

Technical data
100
Prevention of Unexpected Start: AGPS-21 board
Nominal input voltage 115 VAC or 230 VAC
Input voltage range
(selected by jumper) 95...132 VAC (X3 on), 185...265 VAC (X4 on, default)
Nominal frequency 50/60 Hz
Current 0.77 A at 115 V, 0.44 A at 230 V
Max. external fuse 16 A
Input connector X1 3 × 2.5 mm
2
User connector 1, 2, 3 600 V, 25 A, 0.5...4 mm
2
(20...12 AWG)
Output voltage 24 V + 0.5 V
Nominal output current 1.7 A (50 °C, 122 °F)
X2 terminal block type JST B3P-VH
Ambient temperature 0...50 °C (32...122 °F)
Relative humidity 30...90%, no condensation allowed
Approvals CE, C-UL US listed
Ambient conditions
Environmental limits for the drive are given below. The drive is to be used in a heated,
indoor, controlled environment.
Operation
installed for stationary use
Storage
in the protective package
Transportation
in the protective package
Installation site altitude 0 to 4000 m (13123 ft) above
sea level [above 1000 m
(3281 ft), see section
Derating ]
- -
Air temperature -15 to +50 °C (5 to 122 °F).
No frost allowed. See
section
Derating.
-40 to +70 °C (-40 to
+158 °F) -40 to +70 °C (-40 to
+158 °F)
Relative humidity 5 to 95% Max. 95% Max. 95%
No condensation allowed. Maximum allowed relative humidity is 60% in the presence of
corrosive gases.
Contamination levels
(IEC 60721-3-3, IEC 60721-3-
2, IEC 60721-3-1)
No conductive dust allowed.
Boards without coating:
Chemical gases: Class 3C1
Solid particles: Class 3S2
Boards with coating:
Chemical gases: Class 3C2
Solid particles: Class 3S2
Boards without coating:
Chemical gases: Class 1C2
Solid particles: Class 1S3
Boards with coating:
Chemical gases: Class 1C2
Solid particles: Class 1S3
Boards without coating:
Chemical gases: Class 2C2
Solid particles: Class 2S2
Boards with coating:
Chemical gases: Class 2C2
Solid particles: Class 2S2
Atmospheric pressure 70 to 106 kPa
0.7 to 1.05 atmospheres 70 to 106 kPa
0.7 to 1.05 atmospheres 60 to 106 kPa
0.6 to 1.05 atmospheres
Vibration (IEC 60068-2) Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz) sinusoidal
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz) sinusoidal
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz),
max. 15 m/s
2
(49 ft/s
2
)
(9 to 200 Hz) sinusoidal
Shock (IEC 60068-2-29) Not allowed Max. 100 m/s
2
(330 ft./s
2
),
11 ms
Max. 100 m/s
2
(330 ft./s
2
),
11 ms
Free fall Not allowed 100 mm (4 in.) for weight
over 100 kg (220 lb) 100 mm (4 in.) for weight
over 100 kg (220 lb)